台灣森村股份有限公司 -- Easy Change

Easy Change   

  • 1. The filter is in place.
  • 2. Remove the clamp band.
  • 3. Remove the shell.
  • 4. Remove the filter
  • 5. After the filter is removed.




Product Type XB AD WK XA
Shell Material in Nylon available (=DB type)

Please ask us for detail.

Shell

Material Polypropylene Polypropylene Polypropylene Polypropylene
With or without Air vent No air vent Up-stream side air vent Up-stream and Down-stream side air vent No air vent
Side view
Check valve Material Seal : Polypropylene
Spring : Stainless steel
Seal : Polypropylene
Spring : Stainless steel
Seal : Polypropylene
Spring : Stainless steel
No Check valve
Check valves in PP available

Please ask us for detail.
Bottom view
Total length 62.5L
125L
250L -
500L -
Product Type XB AD WK XA

Current AB Capsules will be unified to new dome-shaped of AD type.
With this change, the current SIDP-AB holders will have to be changed to new SIDP-AD holders.
New AD capsules allow an operator to get rid of an upstream air quick and easily due to the dome-shaped configuration.

Product Type

XW

AW

PCW

Shell

Kind of Shell

Hard Shell

Hard Shell

Thin-walled shell

Thin-walled shell

Polypropylene

Polypropylene

Polyethylene

Side view

Check valve

Material

Seal : Polypropylene
Spring : Stainless steel

Seal : Polypropylene
Spring : Stainless steel

Seal : Polypropylene
Spring : PET

Bottom view

Total length

125L -
250L
500L

Product Type XW AW PCW

Product type Picture Total length(mm) Quantity per housing Connecting configuration End of part number Face to Face dimension Remarks

SIDP

62.5

1

JIS 8A

XA

91

XA type is available only in 62.5 and 125 length.
Since the base portion of XB, AD and WK type is common, this base can be used for each type by changing only the holder of each type.This concept allows to choose the length or / and the type of capsule by changing the type of holder.

IDF 1S

XB AD WK

181

125

1

JIS 8A

XA

91

IDF 1S

XB AD WK

181

250

1

IDF 1S

XB AD WK

181

500

1

IDF 1S

XB AD WK

181

SMDP

250

3

IDF 1S

XB

350

Using a dummy capsule at the user's option, it is possible to change the quantity of the capsules depending on flow rate

6

IDF 1.5S

XB

500

500

3

IDF 1S

XB

350

6

IDF 1.5S

XB

500

MIDP

MIDP

125

7

IDF 1.5S

XW AW

500

250

7

IDF 1.5S

XW AW PCW AP

500

500

7

IDF 1.5S

XW AW PCW AP

500

Ez-Changeアクセサリーパーツ

Bypass Capsule

Bypass capsule is polypropylene parts in order to bypass from the inlet to the outlet of a housing. It improves working efficiency because the in-line cleaning is possible. Inside surface of the piping in the housing can be also cleaned when the pipe before and after housing is cleaned. Bypass Capsule for SIDP/SMDP and for MIDP are prepared.

Dummy Capsule

Dummy Capsule is polypropylene parts for only SMDP housing. Inlet and outlet of SMDP housing is closed by it instead of Ez-Change capsule cartridges. The quantity of Ez-Change capsule cartridges can be changed according to the flow rate, because the inlet and outlet is blocked by Dummy capsule.

  << Prev